-
SG Governor
Available in work ratings of 10.8 and 21.7 inch-pounds, the SG hydraulic speed-droop type governor is designed for u... -
EGCP-2
The control’s functions include: Engine Control Engine Pre-glow Control Fuel Solenoid Control Engine Starter C... -
EasyGen-3100/3200
The easYgen-3000 Series are control units for genset management applications. The numerous inputs and outputs, along... -
EasyGen 2000 Series
I/Os FlexRangeTM – Two separate sets of 3-phase true r.m.s. voltage measuring inputs for the generator and mai... -
EasyGen 1000 Series
I/Os FlexRangeTM – true RMS 3phase generator and mains voltage, measuring inputs: Rated 120 Vac (max. 150 Vac)... -
EasyGen 300 Series
I/O’s 3 phase generator and mains true rms voltage, measuring inputs: rated 480 Vac (max. 600 Vac) Maximum 2 c... -
MicroNet(TM) Plus
The MicroNet Plus control is a VME-based, modular control system with redundant or simplex CPU and power supply opti... -
Atlas-II(TM)
The Atlas-II Control is available in several configurations to meet the specific I/O needs of the prime mover. The m... -
AtlasSC(TM)
The AtlasSC control is a powerful and rugged industrial control with embedded microprocessor technology and dedicate... -
733 Digital Control
The Woodward 733 Digital Control manages and controls reciprocating engines (gas, diesel, or dual fuel) used in powe... -
723Plus Digital Control
The Woodward 723PLUS Digital Control manages and controls reciprocating engines (gas, diesel, or dual fuel) used in ... -
2301E
The Woodward 2301E microprocessor-based control functions like the 2301A load sharing and speed control and 2301D lo... -
2301D and 2301D-EC
The Woodward 2301D and 2301D-EC microprocessor-based controls function like the 2301A load sharing and speed control... -
Dual Dynamics 2301A
The 2301A Load Sharing and Speed Control with Dual Dynamics is housed in a sheet-metal chassis and consists of a sin... -
Proact Integrated Speed Control
The ProAct ISC can be base- or flange-mounted on-engine, and will withstand high levels of vibration and temperature... -
UG-25+ Actuator
The Woodward UG-25+ Actuator is a microprocessor-controlled, mechanical-hydraulic amplified, actuator for controllin... -
UG-25+ Governor
The Woodward UG-25+ governor is a microprocessor-controlled, mechanicalhydraulic amplified, governor for controlling... -
EGB-200P/300P
The EGB-200P/-300P is a governor/ actuator providing the electronic governor with 200/300 lb-ft (270/400 Nm) work c... -
EGB-10P/13P/35P
Under electronic control, speed and droop adjustments are made to the electronics. Most electronic controls provide ... -
PGG Governor
The PGG is a mechanical-hydraulic, pressure-compensated governor that combines a permanent-magnet, speed-setting mot... -
PGA-EG Governor
Backup speed control is accomplished by the simultaneous operation of hydro-mechanical (PGA) and electronic (EG) gov... -
PGA Governor
The PGA is a pressure compensated, hydraulic governor that uses an air signal to establish the engine speed setting ... -
UG-MAS Governor
The UG MAS is a pressure compensated, hydraulic governor designed to accept a standard 4–20 mA electrical current si... -
UG-40 Governor
Lever Governor Engine speed on the Lever governor is set with a speed shaft having almost 90° rotation for the full ... -
UG Governor
UG Governors (generally known as the “UG-8”) are available in either a UG Dial or UG Lever configuration. Each model... -
EG-3P/6P/10P
The EG-3P/6P/10P actuators convert an electrical signal to a proportional rotary output shaft position to control th... -
PGG-EG Governor
The PGG-EG governor/actuator combines the proven dependability of the hydromechanical PG governor with the flexibili... -
SG Governor
Available in work ratings of 10.8 and 21.7 inch-pounds, the SG hydraulic speed-droop type governor is designed for u... -
PSG Governor
The PSG governor providers hydraulic powered travel in the increase-fuel direction only. A return spring is used to ...
